Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
!
Press the
"Select"
key.
!
Use
and
key to select "Auto Answer".
!
Press the
"Select"
key.
!
Use
or
keytoselectONorOFFtoenableordisablethefunction.
!
Press the "Save"
key. You will hear a confirmation beep.
Factory default: On
21.8 Setting date and time (Date & Time)
!
Press the "Menu"
key.
!
Use
and
key to select "HS Settings".
!
Press the
"Select"
key.
!
Use
and
key to select "Date & Time".
!
Press the
"Select"
key.
!
Use
or
key to choose between "Date Format", "Time
Format","SetDate"or"SetTime".
Press the "Select"
key. The display shows the current setting.
Date Format
!
Use
or
key to select "DD-MM" (DayDay-MonthMonth) or
"MM-DD" (DayDay-MonthMonth).
!
Press the "Save"
key.
Time Format
!
Use
or
key to select "12 - Hour" or "24 - Hour".
!
Press the "Save"
key.
Set Date
!
Enter the date with the numeric keys 0 to 9.
!
Press the "Save"
key.
Set Time
!
Enter the time with the numeric keys 0 to 9.
!
Press the "Save"
key.
Factory default: Date Format: DD-MM, Time Format: 24 - Hour
21.9 Selecting a base (Select Base)
This function allows you to select a base from those already registered to the
handset (up to 4 bases can be registered to one handset).
!
Press the "Menu"
key.
!
Use
and
key to select "HS Settings".
!
Press the
"Select"
key.
!
Use
and
key to select "Select Base".
!
Press the
"Select"
key.
!
Use
or
key to select the desired base.
!
Press the "Select"
handset will sound a warning tone. After a short time, a confirmation
melody will sound, and the name of the handset will change
respectively.
GB - 68
page 68
"Alarm" appears.
The display shows the current setting.
"Alarm" appears.
"Alarm" appears.
The display the shows the current base.
key. If you select a non-existent base, the
Note:
The handset will only work with the base it has last been registered to, or with
the selected base.
21.10 Resetting the handset (HS Reset)
!
Press the "Menu"
key.
!
Use
and
key to select "HS Settings".
!
Press the
"Select"
key.
!
Use
and
key to select "HS Reset".
!
Press the
"Select"
key.
!
Enter the current PIN code.
!
Press the "Reset"
settings will be returned to the factory default. Otherwise a warning
sound will be heard and the settings will remain. After resetting, the
handset will return to standby mode.
22. Registering a handset to a base
(Registration)
The supplied handset is already registered with the number 1. You can
register up to 5 handsets/door units to the same base (see chapter 28
"Optional accessories"). A handset can be registered to up to 4 bases.
!
Press and hold the key [59] on the bottom of the base for at least 5
seconds.
!
Press the "Menu"
key.
!
Use
and
key to select "Registration".
!
Press the "Select" key
!
Use
or
key to scroll through the base names list ("Base 1" to
"Base 4".
!
Press the "Select" key
!
As soon as the base is found, and the handset is successfully registered,
you will be prompted to enter the PIN code (the default one is 0000).
!
Press the
key. On validation of the PIN code, the registration tone
will sound and the base assigns a number to the handset. If the PIN code
entered is invalid, a warning tone will sound, and the handset will return
to the previous registration state. If the base is not found, the handset
will behave according to the Out of Range condition.
Notes:
!
If the registration of a handset was deleted, it can be registered to the
base again as described above.
!
To register a registered handset to another base, simply follow the steps
described above with another base.
!
The handset will only work with the base it has last been registered to, or
with the selected base (see chapter 22.9).
"Alarm" appears.
The display shows "PIN ?".
key. If the PIN code is validated, all Base
.
to choose a base.
Publicité
Chapitres
Table des Matières
