Basic Settings; Registration Of Further Handsets; Radio Range; Door Intercom Function - PENTATRON TF04T Consignes D'utilisation Et De Sécurité

11. Basic settings

#
Selecting a language see chapter 22.5
#
Factory default: German
#
Setting date and time see chapter 22.8
#
Setting the ring tone (melody and volume) see chapter 22.3
#
Setting the audio volume of your conversational partner see chapter
22.2

12. Registration of further handsets

The supplied handset is already registered with the number MT1.
You can register up to 5 handsets to the same base (see chapter 27 "Optional
accessories").
!
Press and hold the pager button [59] on the bottom of the base for at
least 5 seconds. Than press the "Menu" key
!
Press the or key repeatedly to choose "Registration".
!
Press the "Select" key
!
Use or key to scroll through the base names list.
!
Press the "Select" key
!
As soon as the base is found, and the handset is successfully registered,
you will be prompted to enter the PIN code (the default one is 0000).
!
Press the "Select" key . On validation of the PIN code, the registration
tone will sound and the base assigns a number to the handset. If the PIN
code entered is invalid, a warning tone will sound, and the handset will
return to the previous registration state. If the base is not found, the
handset will behave according to the Out of Range condition.

13. Radio range

The range of the radio transmission depends on various parameters. Under
ideal conditions up to 200 m can be achieved in free space (between door
unit and base as well as between base and handset), indoors the range is
only up to 30 m.
A guarantee for this range cannot be given, as the local conditions at the
installation site may interfere with it.
The radio range can be affected by the following:
#
walls and ceilings, especially those made from reinforced concrete or
metal
#
coated windows (e.g. energy saving windows), radiators, mirrors, metal
surfaces
#
electrical wires and electric devices (e.g. electric motor, microwave oven)
#
devices with the same or an adjacent frequency.
The strength of the received radio signals is displayed with the icon
blinking icon = weak or lost signal
permanently flashing icon = good radio communication
page 61
.
.
to choose a base.
14

. Door intercom function

!
When the visitor presses the bell button [3], the door unit and all
registered handsets will ring for up to 1 minute. The display display
shows e.g. "HS2 Calling". To talk with the visitor, pick up the handset or
press the dial/speaker key [50].
!
To end the conversation, press the end key
the base.
!
If a door release is connected to the door unit, the door can be unlocked
by pressing the hash key [45] for approx. 2 seconds.
!
If a visitor presses the bell button while you are having a telephone
conversation, you will hear a call waiting signal, but you cannot answer
your visitor's call. If another handset is registered, it will ring and you can
talk to your visitor with this handset.

15. Description of the keys/display

15.1 Key functions (see fig. B)
Dial/speaker [50]
to make/answer a call; activates the speaker if pressed during
a call
End/power [44]
to end a call; pressing and holding turns the handset on/off
Menu/Select [51]
to open menu functions in standby mode; to confirm selection
and action; to perform "flash" function
Redial / Back [42]
Redial, to return to the previous menu; to mute the
microphone during a call; to delete an incorrect input
Navigation keys/further functions [43]
:
[44] or place the handset in
up/CID book [65]
to scroll up through lists and menu options; to
increase the earpiece/speaker volume during a call;
to open the CID book
down/phonebook [66]
to scroll down through lists and menu options; to
reduce the earpiece/speaker volume during a call; to
open the phonebook
INT [67]
to set up an internal call to another handset; to
transfer an incoming call to another handset; to s
a conference call with an external line and an internal
handset
et up
GB - 61