Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Viewing and dialing phone book entries
!
In the standby mode, press the
!
Press
or
key repeatedly until the desired name is displayed.
!
Press the "Dial"
or the
19.1 Adding entries to the phone book (New)
!
Press the "Menu"
key.
!
Use
and
key to select "Phonebook".
!
Press the
"Select"
key.
!
Press the
"Select"
key The display shows "N
!
Enter the desired name.
!
Press "Next"
for confirmation. The display shows "Number ?".
!
Enter the desired telephone number (up to 20 digits).
!
Press the "Next"
key.
!
Use
or
key to select the ring tone you want to assign to the
number.
!
Press the "Save"
key for confirmation.
Notes:
!
If you make a mistake while entering the number, you can use the
"Erase"
key to correct it. Each time you press the key the last digit
is deleted.
!
Using a pause:
A pause is useful when you access an interactive voice
response system, such as an automated banking system. A pause
provides a delay of 3 seconds. If you want to insert a pause when you
dial a number in standby mode or store a number in memory, press the
key till the letter P appears.
19.2 Changing phone book entries (Edit)
!
Press the "Menu"
key.
!
Use
and
key to select "Phonebook".
!
Press the
"Select"
key.
!
Use
and
key to select "Edit".
!
Press the
"Select"
key.
!
Use
and
key to select the desired entry.
!
Press the "Select"
key to confirm.
!
If necessary, press the "Erase"
new name and press the "Next"
!
If necessary, change the phone number.
!
Press the "Next"
key.
!
If necessary, use
and
!
Press the "Save"
confirmation beep.
page 65
key.
key
to dial out the number.
"New" appears.
.
ame
?".
"New" appears.
key to clear digits, then enter the
key to confirm.
key to change the ring tone.
key to save. The handset generates a
19.3 Deleting one or all entries from the
phonebook (Delete / Delete All)
!
Press the "Menu"
key.
!
Use
and
key to select "Phonebook".
!
Press the
"Select"
key.
!
Use
and
key to select "Delete" or "Delete All".
!
Press the
"Select"
key.
!
Use
and
key to select the desired entry.
!
Press the "Select"
key. The display shows "Confirm ?".
!
Press the "Del" / "Del All"
confirmation beep.
19.4 Phone book status (PB Status)
The PB status shows the number of phone book entries already stored.
!
Press the "Menu"
key.
!
Use
and
key to select "Phonebook".
!
Press the
"Select"
key.
!
Use
and
key to select "PB Statusl".
!
Press the "Select"
key. E.g. "11/50" is displayed, that means there
are 11 out of 50 possible entries in the phone book.
20. Base settings (BS Settings)
20.1 Deleting a handset from the base (Terminate HS)
With this function an additional handset (TF04M) can be unenrolled. This
procedure must be made on the original handset from the set. The handset
from the set cannot be unenrolled.
!
Press the "Menu"
key.
!
Use
and
key to select "BS Settings".
!
Press the
"Select"
key.
!
Press the
"Select"
key.
!
Enter the current PIN code (the default PIN code is "0000").
!
Press the "OK"
key.
!
Use
or
key to select a handset.
!
Press the
"Select"
key to confirm.
or a nonexistent handset, a warning tone will be heard. After a few
seconds, the selected handset will not be registered any more.
20.2 Dialling mode (Dial Mode)
This setting is only necessary if required by your telephone system. See user
manual of the telephone system.
You can select to change the dialling mode by the following steps:
!
Press the "Menu"
key.
!
Use
and
key to select "BS Settings".
"New" appears.
key to confirm. The handset generates a
"New" appears.
"Terminate HS" appears.
The display shows "PIN ?".
If you select the current handset
GB - 65
Publicité
Chapitres
Table des Matières
