Technical Data; Safety Instructions - PENTATRON TF04T Consignes D'utilisation Et De Sécurité

5. Technical data

Door unit TF04T
Operating voltage: 12
requirement of the door release)
2x LR14 (C), 1.5 V alkaline batteries
Power consumption: max. 0.8 mA/12
max. 200 mA/12
Transmission frequency: 1880 - 1900 MHz
Transmission power: < 250 mW
RF modulation: GFSK
RF range to base: up to 30 m indoors, up to 200m in free space
Operating temperature: -20 °C to +50 °C (note: below 0°C the
transmission range can be reduced)
Protection class: IP 44
Dimensions: 60 x 175 x 34 mm
Weight: approx. 156 g
Handset TF04M
Power supply: 2x Ni-MH batteries AAA, 1.2 V; 600 mAh
Charging voltage: from base
Initial charging duration: 15 hours
Standby time: up to 180 hours
Talk time: up to 8 hours
RF modulation: GFSK
RF range to base: up to 30 m indoors, up to 200m in free space
Operating temperature: 0 °C to +40 °C
Dimensions: approx. 48 x 159 x 29 mm
Weight: approx. 132 g
Base TF04B
Operating voltage: 7.5
Current consumption: max. 300A,
Operating temperature: 0 °C to +40 °C
Dimensions: 115 x 115 x 68 mm
Mains adapter
Power supply: 230 V, 50 Hz, 150 mA
Power output: 7.5
Application: indoor use only
Relay module RE 05
Operating voltage: 12
Switching power: 30
Switching time: 1- 9 sec.
Dimensions: 83 x 58 x 33 mm
Application: indoor use only
GB - 58
page 58
V DC (min. 300 mA plus power
or
V DC (standby),
V DC (use)
V DC (mains adapter)
V,300 mA, 2.25 VA
V DC, max. 60 mA
V DC, max. 10 A,

6. Safety instructions

The following instructions are provided for your safety and satisfaction during
operation of the machine. Note that non-observance of these safety
instructions results in significant risks of accident.
Explanation of symbols and terms used:
Danger! If this point is not heeded, life and health are endangered.
Attention! Non-observance of these instructions puts property at risk
of damage.
Tip! Optimum results will be achieved by observing these instructions.
Danger!
!
Do not leave small children unsupervised with the product, packaging
material or small parts. Otherwise there is a risk of fatal injury due to
choking!
!
Do not damage any gas, electricity, water or telecommunication lines
during drilling and fixing work. Otherwise there are dangers of personal
and fatal injury!
!
Treat the supply lines carefully. Lay these so that they cannot be
damaged and do not present any tripping hazard. Fix the cables
sufficiently. Do not pull the cables over sharp edges and do not crush or
crimp them elsewhere. Otherwise there are dangers of personal and fatal
injury!
!
Do not allow the product to have contact with moisture (except the door
unit: protection class IP44). Never immerse the product in water.
Otherwise there is danger of fatal injury!
!
Do not use the handset in moist or explosion-risk environments.
Otherwise there is danger of fatal injury!
!
Use only the supplied power mains adapter with the base. Before
connecting this to the mains, ensure that the mains supply complies with
230 V AC, 50 Hz and is fitted with a fuse according to regulations.
!
Use only rechargeable batteries of the same type in the handset. Do not
use primary batteries. Pay attention to the correct polarity. Otherwise
there are dangers of personal and fatal injury!
!
Ensure that the batteries are not short circuited or exposed to fire. The
batteries must not be opened or recharged. Otherwise there is a risk of
fatal injury due to explosion!
!
Leaking or damaged batteries can cause burns by contact with skin.
Handle these using suitable protective gloves.
!
The function of medical apparatus can be disturbed by the product. Pay
attention to technical constraints in the area of use, for example in
medical practices. Otherwise there is a risk of fatal injury!
!
Note that the handset can cause an unpleasant humming sound in
hearing aids.