Basic Functions; Making A Call; Receiving A Call; Muting The Microphone - PENTATRON TF04T Consignes D'utilisation Et De Sécurité

Redial [68]
to enter the redial book; to insert a pause when pre-
dialing a number
Star [48]
to turn on/off the keypad lock function; to set up a conference
call
Hash key [45]
to activate the door release
0-9 n umbers 0-9 / letters from A-Z / symbols
key assignment:
Key Characters in the displayed order
0 (spc)
1 -
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
15.2 Icons on the display display (see fig. B)
signal icon
handset name
date 01/01
Menu
The function of the left hand key is
described here [51]
indicates that the line is engaged
indicates that you have missed one or more calls;
when the symbol flashes the caller list is full
indicates that the hands-free function is enabled
appears when the keypad is locked

16. Basic functions

All descriptions in this manual assume that the handset is in standby mode.
Set the telephone to standby mode by pressing the
GB - 62
page 62
& / .
1 @ _
B C 2
E F 3
H I 4
K L 5
N O 6
Q R S
U V 8
X Y Z
battery icon
HS 1
00:27
time
Redial
The function of the right hand key is
described here [42]
key.

16.1 Making a call

!
Pick up the handset and press the
and the period the handset has been activated in hours (minutes :
seconds) appear on the display, the handset is not in standby mode any
more.
!
Dial a telephone number.
!
To end the call, either press the
base.
You can also enter the desired phone number in standby mode which allows
you to make corrections before dialling. Follow these steps:
!
Pick up the handset.
!
Enter a telephone number. If required, press the
pause. "P" appears on the display.
!
Check the telephone number. If you made a mistake while entering the
number, you can use the "Erase" key
!
When the number appears correctly, press the
will dial the number.
!
To end the call, either press the
base.

16.2 Receiving a call

7
When a new call is received, the call information will appear on the display
and the telephone rings.
9
If the caller can be identified, the caller's phone number is displayed.
!
To answer the call, press the
Answer function, when the handset is in the base, simply pick it up to
answer.
!
To end the call, either press the
base. After hanging up, the display shows the

16.3 Muting the microphone

During a conversation, you can temporarily switch your handset's
microphone off, so that the other party cannot hear you.
Example: You want to say something to another person in the room but do
not want the other party to hear you.
!
To mute your microphone, press the "Mute"
conversation. "Call Muted" appears on the display.
!
To unmute the microphone, press the "Mute"

16.4 Adjusting the volume

During a conversation, you can use the keys
of the handset (or the speaker in hands-free mode) from volume 1 to 5. The
selected volume is displayed on the display. You can also set the volume in
the menu "Audio Setup".
key. "Talking", the icon
key or replace the handset in the
key to insert a
to clear the last digit.
key, and t he handset
key or replace the handset in the
key. If you have activated the Auto
key or replace the handset in the
call duration.
key during the
key again.
or to adjust the volume