Briteq BTX-TITAN SIRIUS HRI 280 Mode D'emploi page 7

ENGLISH
 Remove the cables gently from the lamp terminals (Fig.3)
 No need to unscrew any more scews to remove the lamp, just GENTLY move the two metal parts that
maintain the lamp in position. Hold the lamp by the base during this operation (Figure 4)
 Remove the lamp from the head of the BTX-TITAN (Figure 5)
 Connect the cables to the new OSRAM "Sirius HRI 280W E20.6" lamp
Important: ONLY use an original "Philips MSD Platinum 2R" lamp, other lamps could result in less
performance or even damage the unit.
BRITEQ
®
Figure 3 - Removed cables
Figure 4 - Move the metal support of the lamp GENTLY
Figure 5 - Lamp removed from the head of the BTX-TITAN
5/107
OPERATION MANUAL
BTX-TITAN