Briteq BTX-TITAN SIRIUS HRI 280 Mode D'emploi page 5

ENGLISH
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
Important: Never look directly into the light source! Don't use the effect in the presence of persons suffering
from epilepsy.
DESCRIPTION:
DEVICE:
1. Head
2. Arm
3. Base
4. Tilt arm self-locking handle
5. Pan self-locking handle
Caution: the head and arm must be unlocked before operation!
 Tilt mechanism locks and releases every 45°
 Pan mechanism locks and releases every 45°
CONTROL PANEL:
6. Wireless DMX led
7. LCD Touchscreen display
8. MODE button
9. UP button
10. DOWN button
11. ENTER button
REAR PANEL:
12. DMX XLR-5Pin out
13. DMX XLR-5Pin in
14. DMX XLR-3Pin out
15. DMX XLR-3Pin in
16. Main Fuse
17. Power switch
®
18. PowerCon In
®
19. PowerCon Out
Hint: Please check our website for special cable assemblies that contain both power (3x1.5mm² with Neutrik
®
PowerCON ) and balanced signal (XLR 3pin) in one cable. Different lengths are available: 1.3m, 3m, 5m and
10m, very convenient!
BRITEQ
®
3/107
OPERATION MANUAL
BTX-TITAN