Briteq BTX-TITAN SIRIUS HRI 280 Mode D'emploi page 15

ENGLISH
PERSONALITY BLACKOUT
P/T moving (on-off)
 On: Blackout while pan/tilt is moving
 Off: No blackout while pan/tilt is moving
Colour moving (on-off)
 On: Blackout while colour changes
 Off: No blackout while colour changes
Gobo moving (on-off)
 On: Blackout whiles gobo changes
 Off: No blackout while gobo changes
PERSONALITY SCREEN
Brightness
Set the brightness of the screen
Screen time
Set a delay from 0 to 10 minutes to automatically exit the menu interface and switch the screen off.
Touch screen (on-off)
 On: The touchscreen is active
 Off: The touchscreen is not active, menu navigation is only possible using the buttons.
Auto screen (on-off)
 On: the screen is automatically rotated, based on the angle of the BriteQ BTX-TITAN.
 Off: the screenhe orientation is fixed
MANUAL CONTROL LAMP
Lamp control (on-off):
MANUAL CONTROL RESET
Reset All: Reset all functions of the BriteQ BTX-TITAN
Reset pan/tilt: Reset pan and tilt
Reset colour: Reset colour wheel
Reset gobo: Reset gobo wheel
Reset other: Reset all other functions
MANUAL CONTROL CHANNEL
Change the value for each channel manually. This is an easy way to quickly test the machine without any
DMX console.
ADVANCED CALIBRATION
Calibration of the 14 integrated motors. Values can be set from 001 to 255.
Calibration password is "0088".
ADVANCED FACTORY DEFAULT
Return to the factory default settings.
ADVANCED TOUCH CALIBRATION
Recalibrate the touchscreen by pressing the red cross on the screen.
BRITEQ
®
Set the lamp on/off manually
13/107
OPERATION MANUAL
BTX-TITAN