Assembly Of Speedy 3 Export 3M - TUBESCA-COMABI SPEEDY 3 EXPORT Manuel De Montage Et D'utilisation

SPEEDY 3 EXPORT
Chapter 2:

2-2 Assembly of SPEEDY 3 EXPORT 3m

2-2-1 / Booster assembly
Start from the base assembled in chapter 2-1 and attach the brace to the 1st rung. Prepare the 2- and 7- rung ladders removing
the pins and stoppers from their bases. (Tip: fix the pins around the bottom rung of the ladder)
Tip
Place the 2-rung ladder onto the 7-rung ladder and pre-assemble the diagonals as shown in the diagrams below.
x2
Install the boosters on the base of the scaffolding and assemble the lower diagonal attachments. Replace the 4 pins on the
bottom of the booster so that they can be locked into the base.
Page 9 of21