Operating Instructions; Working Area - TUBESCA-COMABI SPEEDY 3 EXPORT Manuel De Montage Et D'utilisation

SPEEDY 3 EXPORT
Chapter 3:
The conformity of the assembly must be verified by the site safety manager appointed by the company
director.
The following elements will be verified:
• The supports.
• The assembly.
• The environment.
• The brakes.
• Wedging systems (to make up for local levelling defects).
The information in the instructions affixed to the base MUST be adhered to.
Chapter 4:
These instructions do not replace the regulations in force which must be observed.
• It is important to respect the admissible loads on the bases and the structure.
• Horizontal forces must not exceed 30kg.
• Maximum wind with stabilisers = 45km/h.

Working area:

• Keep away from bare current-carrying conductors.
• Ensure that access to equipment is prohibited in areas which are accessible to the public.
• Mark out the installation area if it is to be accessed by machinery, vehicles, etc.
• Make sure that there are no aerial obstacles in the manoeuvring area.
• Provide a bearing race on soft terrain.
The following are prohibited:
• Using a gibbet (manual included) positioned on the exterior of the scaffolding.
• Covering mobile scaffolding even partially.
• Increasing the height beyond the authorised level.
• Using components other than those provided and described in the parts list.
• Using the scaffolding without its stabilisers (with the exception of 02408 321).
• Using scaffolding which has not been assembled vertically (tolerance: 1%).
• Using scaffolding which has not been assembled according to the instructions of this manual.
• Creating a bridge between the scaffolding and a building or between two pieces of scaffolding.
• Jumping on the bases.
• Accessing the work base from the outside.
• Using boards as a base.
• Leaning an access ladder against the scaffolding.
• Anchoring the product. If winds are higher than 45km/h, the unit must be disassembled
After assembly and prior to use

4-1 Operating instructions

.
Page 16 of21