Packing List - GreenWorks GDC60 Manuel D'utilisation

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SV HR HU RO BG EL AR TR HE LT LV ET
SPECIFICATIONS
Model
Rated Voltage
Rated Pressure
Permissible Pressure
Power Rating
Rated Water Flow
Maximum Water Flow
Maximum Water Inlet
Pressure
Maximum Water Inlet
Temperature
LPA(sound pressure
level)
LWA(sound power level)
Protection Degree
Vibration
Battery
Charger
DESCRIPTION
See figure 1.
1. Handle
2. ON/OFF Switch
3. Water outtake
4. Bucket
5. Bucket buckle
6. Base unit
7. Battery door
ASSEMBLY
UNPACKING
This product requires assembly.
„ Carefully open the carton, then remove the product
and any accessories from the carton.
English (Original instructions)
GDC60
60V
5.5 MPa
7 MPa
750W
3.7 l/min
5 l/min
0.7 MPa
40℃
78.9 dB(A) K:3.0db(A)
95 dB(A),K:3.0db(A)
IPX 5
< 2.5 m/s² K=1.5 m/s²
2918307/2924207
/2918407/2924307
2918507
Double-insulated
construction.
If in doubt, call Greenworks Tools Customer Service
for assistance. Operation of a product that may have
been improperly preassembled could result in serious
personal injury.
„ Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
„ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
„ If any parts are damaged or missing, please contact
Greenworks Tools Customer Service for assistance.
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of this
product with damaged or missing parts could result
in serious personal injury.
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modifi cation is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
Do not connect to power supply until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.

PACKING LIST

- Main machine
- Manual
- Detergent tank
- Adjustable fan jet nozzle
- High pressure hose
- Trigger and wand
- Bucket
ASSEMBLING THE SPRAY WAND (See Figure 2.)
„ Installing Wand to Pressure Washer Gun Insert the
male baynet end (8) of the wand into the female
bayonet outlet (9) firmly.While pushing in the wand
firmly,turn clockwise until tabs lock into place to
ensure a leak-free connection.
2
WARNING
WARNING
WARNING