Storing The Pressure Washer - GreenWorks GDC60 Manuel D'utilisation

EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SV HR HU RO BG EL AR TR HE LT LV ET
NOZZLE MAINTENANCE (See Figure 13.)
Excessive pump pressure (a pulsing action felt while
squeezing the trigger) may be the result of a clogged
or dirty nozzle.
„ Unplug the pressure washer.
„ Turn off the pressure washer and shut off the water
supply. Pull trigger to release water pressure.
„ Remove the nozzle from the lance.
NOTE: Never point the spray lance at your face.
„ Using a straightened paper clip or nozzle cleaning
tool, free any foreign materials clogging or restricting
the nozzle.
„ Using a garden hose, clear/flush debris out of nozzle.
„ Reconnect the nozzle to the lance.
„ Turn on the water supply.

STORING THE PRESSURE WASHER

Store in a dry, covered, frost-free area where the weath-
er can't damage it. Always empty water from gun, hose
and pump.
NOTE: The use of a pump protector is recommended
to prevent cold weather damage during storage over
the winter months.
English (Original instructions)
DISPOSAL
Separate collection. This product must not be disposed
of with normal household waste. Should you find one
day that your product needs replacement, or if it is no
further use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
Batteries
Li-ion
At the end of their useful life, discard batteries with due
care for our environment. The battery contains material
which is hazardous to you and the environment. It must
be removed and disposed of separately at a facility that
accepts lithium-ion batteries.
5