Ribimex Ribiland PRP200DE Manuel D'instructions Et D'utilisation page 17

in the presence of highly inflammable liquids or gases.
-
if the machine is damaged, poorly adjusted, or not fully and firmly assembled.
-
- if the switch does not allow the machine to be started and stopped.
if the machine does not operate correctly, has been dropped, or has fallen into water ; do not try
-
to repair it; take it back to your dealer for maintenance or repair, or to any similarly qualified person,
in order to avoid a risk.
While perching in a tree, on a ladder, on the boom of a machine.
-
11. Warning:
The use of any accessory or attachment, other than those recommended in this instruction manual,
may present a risk of injury to persons or animals and may cause damages.
The user and/or operator are responsible for any damages or injury caused to properties and/or
persons.
12. Remarks:
The safety precautions and instructions given in this manual are unable to cover in detail all the
conditions and situations that may arise.
The operator and/or user must use common sense and caution when operating the product
especially for any matters that are not referred in the above
13. Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when used with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any other battery packs
may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
e) Ensure that the switch is in the OFF position before inserting the battery. Inserting the battery into
power tools with the switch on invites trouble. Injury hazard.
3.2- Safety information about the charger and the battery-pack
Before using the charger and the battery, read all the instructions and cautionary markings on charger,
battery pack and tool.
1) Charger
a) Do not attempt to open or disassemble the charger. If the charger has been dropped or is
damaged in any way, stop using it and do not attempt to repair it. Return the charger for repair to an
authorized service center or a qualified person, to avoid any danger to the user; or discard it according to
local laws.
b) Protect the charger against any heat source (e.g. direct sunlight exposure, fire, heate r...). To
prevent any damage to the charger.
c) Do not expose the charger to water, moisture and cold. Electric shock hazard.
d) If the power cord or the plug becomes damaged, stop using the charger until it has been
repaired by a qualified person. If the supply cord is damaged, it must be replaced by the
manufacturer or its authorized service center, in order to avoid a hazard.. Electric shock hazard.
e) Only use the charger provided with the product, or a same type or same model charger to
charge the battery. The use of other types of charger increases the risk of electric shock, personal