RIB K1400 FAST Instructions Pour L'utilisation Et L'installation page 27

RADIO TRANSMITTER MOON
ACG6082 - 433
ACG7026 - 91
CODE LEARNIG SYSTEM RADIORECEIVERS
RX91/A quarzata and coupling
RX91/A quarzata and terminal board
RX433/A super eterodyne and coupling
RX433/A super eterodyne and terminal board
RX433/A 2CH super eterodyne, 2 channel and coupling
RX433/A 2CH super eterodyne, 2 channel and terminal board
SPARK ANTENNA
In order to make the systems mentioned above give the best performances, you need to
install an antenna tuned on the frequency of the radio receiver installed.
N.B. Pay attention not to let the central wire of the cable to came Into contact with
the external copper sheath, since this would prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can reach it.
SPARK ANTENNA 91 code ACG5454
SPARK ANTENNA 433 code ACG5252
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
BLOCK KEY SELECTOR FOR WALL-INSTALLATION
BLOCK KEY SELECTOR TO BUILD-IN
ACG6081 - 433
ACG7025 - 91
code ACG5005
code ACG5004
code ACG5055
code ACG5056
code ACG5051
code ACG5052
code ACG7059
BLOCK
code ACG1053
code ACG1048
FIT SYNCRO
FIT SYNCRO PHOTOCELLS for the wall-installation - code ACG8026
The range you can set Is 30÷60ft 49÷100".
You can fit many couples close together thanks to the synchronising circuit.
Add the SYNCRO TRANSMITTER, code ACG8028, for more than 2 photocells
couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
PAIR OF COLUMNS
h=0,5m for FIT SYNCRO
NYLON RACK MODULE 4
with zinc plated angle Iron, In 1mt. bars.
Ideal for gates up to 1,000Kg / 2,200lbs weight
PLATE TO BE CEMENTED
Pag. 27 di 40
code ACG8051
Code ACG8057
Code ACS9050
Code ACG8107
E
N
G
L
I
S
H