Setting The Ms Mode; Dmx Channel Assignments; Dmx_9Ch - Chauvet DJ Motion Orb Mode D'emploi

Setting The MS
Mode
DMX Channel
Assignments
Standard
Personality

DMX_9CH

MotionOrb User Manual Rev. 66
To set the MS Mode and MS Address, do the following:
1. Press <MENU> until MS shows in the display.
2. Press <ENTER> until MS Mode shows on the top line of the display.
3. Use <UP> or <DOWN> until the desired MS mode (1–3) shows on the bottom line of the
display.
4. Press <ENTER>. MS Address shows in the display.
5. Use <UP> or <DOWN> until the desired MS Address (1–3) shows on the bottom line of the
display.
6. Press <ENTER>. MS shows in the display.
· The grouping of the MS mode for DMX only works if all the MotionOrb products are
set to the same DMX address.
· The MS Mode and MS Address grouping options are not available in any of the DMX
pixel mapping modes.
The DMX channel assignments are how the DMX controller creates effects with the MotionOrb.
It is important to understand these channel assignments when operating the product with a
DMX controller.
The MotionOrb standard DMX personality includes individual color control and 30 different
effect patterns. The DMX table below shows the channels that control the colors and patterns
Channel Function
1 Dimmer
2 Strobe Speed
3 Red
4 Green
5 Blue
6 Effects Macros 1–15
Value Percent/Setting
000 ó 255
0–100%
000 ó 255
Slow to fast
000 ó 255
0–100%
000 ó 255
0–100%
000 ó 255
0–100%
000 ó 015
No function
016 ó 031
Pattern 1
032 ó 047
Pattern 2
048 ó 063
Pattern 3
064 ó 079
Pattern 4
080 ó 095
Pattern 5
096 ó 111
Pattern 6
112 ó 127
Pattern 7
128 ó 143
Pattern 8
144 ó 159
Pattern 9
160 ó 175
Pattern 10
176 ó 191
Pattern 11
192 ó 207
Pattern 12
208 ó 223
Pattern 13
224 ó 239
Pattern 14
240 ó 255
Pattern 15
4. Operation
Page 25 of 94