Health O Meter PRO PLUS 2101KL Mode D'emploi page 13

01:00
03 Auto Off Time
04 Tone Volume
05 Display Date and Time
06 Display Backlight
The user can set the time elapsed
before the scale goes into the sleep
mode. The default is 1 minute.
When the scale goes into sleep
mode, STANDBY is displayed on
the screen. The maximum setting is
10 minutes Sleep Time.
The user can determine how long the scale will operate
before turning off automatically due to inactivity. Default time
is 10 minutes. If the value is set to zero, the auto off function
is disabled. The maximum setting is 60 minutes Auto Off
Time.
There is an option to adjust the beeping tone of the scale.
This tone should sound when the scale has determined the
weight on the platform, when a key is pressed, after the
scale is turned on, at the end of self-test, or in the case of
fault or warning.
Use the and keys on the keypad to adjust the volume.
Whenever the user presses the key to change a volume, a
beep will sound to indicate the set volume level.
12
This option will turn on or
turn off the date and time
display.