Edit The Epm - Lenze EEPM1RA Instructions De Mise En Service

Operation
4.9 Edit the EPM
This menu item is only displayed when the EPM Programmer is configured for a Servo product.
With this function it is possible to edit PPP BAUDRATE, NETWORK ADDRESS, CAN NODE ID, and CAN BAUDRATE
for Model 94 Servo drives.
Press
1.
MENU
2.
ENTER
ENTER
3.
4.
ENTER
ENTER
MENU
Tip!
• The EPM can only be edited if the configuration of the EPM Programmer and the parameter version of the EPM
are identical. See section 4.13 for changing the configuration of the EPM Programmer.
14
The display shows...
EDIT EPM
EPM INFO
********(16384)>
CAN NODE ID
NETWORK ADDRESS
NET ADDR 31
5
NET ADDR
NETWORK ADDRESS
EDIT EPM
ENGLISH
Explanation
Press the key until the menu appears in the display.
This request is briefly shown in the display.
The EPM parameter version is displayed.
Displays the parameters that can be edited
Select the parameter file you want to Edit
(NETWORK ADDRESS is shown as an example)
The cursor is blinking in the display on the right
Change the parameter
Stores the new value onto the EPM
Returns to the main menu.