Canon imageRUNNER 1750i Guide page 15

Logging in to the Machine
This section describes the operation procedures for the log-in methods provided by
the uniFLOW integration.
Entering a User Name and Password
Enter your user name and password to log in when the screen shown in step 1 is
displayed.
NOTE
To log in to the machine, you must have a valid user name and password (if set)
registered. For instructions on how to register a user name and password in the
uniFLOW server, see the documentation included with the uniFLOW software.
1
NOTE
• If no password is set for the user name, leave [Password] blank.
• If you make a mistake when entering the user name/password, press
enter the correct user name/password.
• If the user name/password that you entered is incorrect, an error message will appear.
Enter your user name and
password (up to 32 characters
respectively) using the on-screen
keyboard and -
keys).
❑
Press [User] ➞ enter your user name ➞
press [OK].
❑
Press [Password] ➞ enter the password
➞ press [OK].
The characters that you enter for the
password are displayed as asterisks
(********).
❑
Press [Log In].
You can also press
log in.
Logging in to the Machine
(numeric
(Log In/Out) to
(Clear) ➞
EN-8