Canon imageRUNNER 1750i Guide page 12

Settings of Department ID and User ID Management for
the uniFLOW Integration
Before you use the uniFLOW integration, be sure to set the Department ID and
User ID Management settings as indicated on the table below.
IMPORTANT
• Disable User ID Management before you use the uniFLOW integration.
• The required setting of Department ID Management varies depending on the
authentication modes (authentication to the machine or the Login and Document
Release function).
Authentication Mode
(See p. EN-3)
Authentication to the
Machine
Authentication to the
Login and Document
Release Function
* User name and password registered in the LDAP server, not in the machine for the conventional User ID
Management.
EN-5
Managing the Machine with the uniFLOW Integration
Required Settings of the Management
Modes on the Machine
Log-in Method (See
p. EN-4)
Department ID
Management
User Name and
Password*
PIN Code
ID Card
User Name and
Password*
PIN Code
ID Card
User ID
Management
ON OFF
OFF OFF