Battery Power; Volume Control - Roadstar RCR-3650UMP Manuel D'instructions

1 English
LOCATION OF CONTROLS
1. USB SOCKET
2. SKIP + BUTTON
3. SKIP - BUTTON
4. M+/EQUALIZER/FOLDER BUTTON
5. M-/MODE/CLOCK BUTTON
6. PLAY/PAUSE/SCAN BUTTON
7. STOP/MEMO/SLEEP BUTTON
8. CASSETTE PAUSE
9. CASSETTE STOP/EJECT
10. CASSETTE FAST FORWARD
11. CASSETTE REWIND
12. CASSETTE PLAY
13. FM ANTENNA
14. HANDLING
15. CD DOOR
16. ON/OFF/FUNCTION BUTTON
17. VOLUME KNOB
18. SPEAKERS
19. CASSETTE DOOR
20. LCD DISPLAY
21. AUX-IN SOCKET
22. BATTERY COMPARTMENT
23. EARPHONES SOCKET
24. AC SOCKET
AC POWER
You can power your portable system by plugging the detachable AC power cord into the AC
inlet at the back of the unit and into a wall AC power outlet. Check that the rated voltage of
your appliance matches your local voltage. Make sure that the AC power cord is fully
inserted into the appliance.

BATTERY POWER

Insert 6 x UM2 size batteries into the BATTER. Be sure that the batteries are inserted
correctly to avoid damage to the appliance. Always remove the batteries when appliance will
not be used for a long period of time, as this will cause leakage to the batteries and
subsequently damage to your set.
INTRODUCTION
This unit has two working modes:
STANDBY MODE: The display shows the current time and the speakers and backlight are

off.
PLAYBACK MODE: The blue backlight is on and you can listen to music.

When no sound is produced, the unit will switch to STANDBY MODE automatically after 15
minutes.

VOLUME CONTROL

Press VOLUME KNOB (17) repeatedly to select the desired volume level.

To listen to different music genres, there is a preset equalizer. Press and hold M+/EQ/
