Power Supply; Setting The Correct Time; Setting The Alarm - Roadstar HIF-1996D+BT Manuel D'instructions

18. INFO
19. PRESET
20. TIMER
Press (5) on remote repeatedly to select DAB / FM / BT / CD / USB / AUX / PHONO / TAPE
mode.

POWER SUPPLY

This unit operates from a main supply of 230V ~ 50Hz. Connect the AC power cord to the AC
household main outlet. Ensure that the voltage is as indicated on the rating plate on the rear
of the unit.
Connect the unit to the power supply. Switch ON/OFF SWITCH (24) to ON position to turn
the unit ON. Switch ON/OFF SWITCH (24) to OFF position to switch the unit OFF.
This unit has two working modes:
STANDBY MODE: The display shows the current time and the speakers and backlight are
off.
PLAYBACK MODE: The blue backlight is on and you can listen to music.
When no sound is produced, the unit will switch to STANDBY MODE automatically after 15
minutes.
To switch between PLAYBACK MODE and STANDBY MODE, press and hold PLAY/PAUSE
(14) or press ON/OFF (1) on remote control.

SETTING THE CORRECT TIME

In STANDBY mode:
1. Press and hold STOP (15) (6 on remote). 12/24 digits will flash on the display. Press
SKIP+/- (16/17) (12/13 on remote) repeatedly to set the correct hour. Press STOP (15) (6
on remote) again to confirm.
2. The hour digits will flash on the display. Press SKIP+/- (16/17) (12/13 on remote) repea-
tedly to set the correct hour. Press STOP (15) (6 on remote) again to confirm.
3. The minute digits will flash on the display. Press SKIP+/- (16/17) (12/13 on remote) re-
peatedly to set the correct minute. Press STOP (15) (6 on remote) again to confirm.
4. The year digits will flash on the display. Press SKIP+/- (16/17) (12/13 on remote) repea-
tedly to set the correct year. Press STOP (15) (6 on remote) again to confirm.
5. The month digits will flash on the display. Press SKIP+/- (16/17) (12/13 on remote) re-
peatedly to set the correct month. Press STOP (15) (6 on remote) again to confirm.
6. The day digits will flash on the display. Press SKIP+/- (16/17) (12/13 on remote) repea-
tedly to set the correct day. Press STOP (15) (6 on remote) again to confirm.

SETTING THE ALARM

In STANDBY mode:
1. Press and hold TIMER (20 on remote). The hour digits will flash on the display. Press
SKIP+/- (16/17) (12/13 on remote) repeatedly to set the correct hour. Press TIMER (20
on remote) again to confirm.
2. The minute digits will flash on the display. Press SKIP+/- (16/17) (12/13 on remote) re-
peatedly to set the correct minute. Press TIMER (20 on remote) again to confirm.
3. Press SKIP+/- (16/17) (12/13 on remote) repeatedly to choose the alarm mode: DAB/FM/
CD/USB/TAPE. Press TIMER (20 on remote) again to confirm.
4. Press TIMER (20 on remote) to activate the alarm. The alarm icon will appear on display.
Once the alarm hour is reached the unit will start playing in the chosen mode.
5. Press TIMER (20 on remote) in standby mode to deactivate the alarm. The alarm icon
will disappear from the display.
English 2