Table des Matières
Publicité
INSP
GEAR SELECTION
ADJ
GEAR SELECTION
The reduction ratio of the driven gear to the
drive gear must be set according to the snow
conditions. If there are many rough surfaces or
unfavorable snow conditions, the drive/driven
gear ratio should be increased. If the surfaces
are fairly smooth or better snow conditions
exist, decrease the ratio.
Gear ratio chart
The drive and driven gears and the chains
shown in the gear ratio chart are available as
options. The figures containing a decimal point
represent the drive/driven gear ratios, while
the bottom numbers designate the number of
links in the chain.
8
Publicité
Table des Matières
