Cleaning The Spray Arms; Cleaning The Dishwasher - Cooke & Lewis 5059340123318 Mode D'emploi

03

Cleaning the Spray Arms

Check the spray arms weekly to ensure that all the jets are clear and not blocked with limescale or food particles. If it is necessary
to clean the spray arms, they can be removed as follows:
Bottom arm
1. Remove bottom rack.
2. Hold the arm centrally and pull vertically upwards.
3. Clean the jets with a small brush and running water.
4. Replace by pushing the arm down until it clicks into place.
Top arm
1. This can be removed with the top rack still in place.
2. To remove the whole spray mechanism, slide the top rack
forwards and unclip the front and back from the underside of
the top rack.
3. Unscrew the locking nut clockwise to remove the spray arm
from the feeder pipe.
4. Alternatively, to leave the feeder pipe attached to the rack
and just remove the spray arm, unscrew the locking nut as
in step 3.
5. Clean the jets with a small brush and running water.
6. Replace the spray arm by tightening the locking nut and
clicking the feeder arm into place on the rack.
7. Ensure that the feeder pipe engages with the water supply
at the back of the machine when the top rack is pushed into
the machine.
04

Cleaning the Dishwasher

Regularly wipe the door seals with a well wrung damp cloth to remove traces of food and other debris. Please ensure that water
does not enter into the lock or electrical components mounted in the door.
WARNING: Do not use abrasive cleaners or scouring pads to clean the dishwasher
because they will scratch the finish.
Customer helpline (toll free):
UK 0800 324 7818 uk@kingfisherservice.com
Eire 1-800 932 230 eire@kingfisherservice.com
GALA13082-01_209193_s1_s1_60cm built-in dishwasher IM V31120 BX220IM V3R.indd 32
32
10/11/2020 12:18