Speedaire Operating Instructions & Parts Manual
Speedaire Gasoline Air
Compressor, Generator
and Welder
Maintenance
To ensure satisfactory operation over an extended period of time, an engine requires normal maintenance at regular
intervals. The Periodic Maintenance Chart below shows periodic inspection and maintenance items and suitable intervals.
The bullet mark designates that the corresponding item should be performed at that interval.
NOTE: Some adjustments require the use of special tools or other equipment. An electronic tachometer will facilitate
E
setting idle and running speeds.
N
G
Procedure
L
Check Pump Oil Level
I
Check Engine Oil Level
S
Oil Leak Inspection
H
Check Engine Air Filter
Drain Condensation in Air Tank (s)
Inspect Guards/Covers
Check for Unusual Noise/Vibration
Check for Air Leaks
Check cylinder and head fins for dust
and dirt
Check battery electrolyte level
Check fuel lines (replace if necessary)
Clean Exterior of Compressor
Inspect Air Filter
Inspect Belt
Check Safety Relief Valve
Change engine oil (••)
Clean fuel filter
Clean dust and dirt from
cylinder and cylinder head fins (•••)
Change Pump Oil (•)
Replace Air Filter
Check Engine Spark Plug
Add fuel stabilizer
Run unit dry
• The pump oil must be changed after the first 50 hours of operation and every 200 hours or 3 months, whichever
comes first.
•• The engine oil must be changed after the first 5 hours of operation and every 50 hours or 3 months, whichever comes
first.
••• Service more frequently under dusty conditions.
Every 2 years, an Authorized Service Technician should check the safety valve, intake valves and delivery valves.
For Warranty and Service Call:
1-800-648-8478
®
Daily
Weekly
X
X
X
X
X
X
X
X
X
X
X
X
X
10
Monthly
100
200
Hours
Hours
X
X
X
X
X
15D802
Before
Storage
X
X
X
X
X