Internal Memory Operation; Reviewing Stored Data; Maintenance; Cleaning The Test Piece - REED R7900 Manuel D'utilisation

Internal Memory Operation

The internal memory is divided into 5 files. Each can save 100
measurement values. Before saving data be sure to set file number first.
1. Press the Mode Button to highlight the Save File Name on the
LCD
2. Press the Enter Button to scroll through the memory files, F1 to F5
3. Press the Velocity Button to save and exit

Reviewing Stored Data

1. Press the Mode Button to highlight the Save File Name on the
LCD
2. Press the Save Button to select the contents of the memory
selected
3. Press the Enter button to erase the current saved value
4. Press the Up and Down buttons to scroll through he saved values

Maintenance

Cleaning the Test Piece

Clean the Test Pieces to prevent them from rusting. After taking a
measurement the test pieces should be cleaned. If the pieces are not to
be used for a long period of time coat them with oil to prevent rust.

Protecting the Probe

• The surface of the probe is made of allyl resin, which is susceptible
to scratches from coarse surfaces. During operation be sure to press
the probe lightly against the material being measured.
• Remove dirt from the cable after use as oil and dirt will age and
534 Blue
break the probe line.
123 Yellow
• The probe cannot take measurements when the temperature of the
485 Red
123 Yellow
surface to be measured exceeds 60°C.
534 Blue
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
Only if you REALLY need them:
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
reedinstruments
www
Rich Black -
REED Instruments
20/20/20/100
19
com