Menu Options; System Setup - REED R7900 Manuel D'utilisation

Menu Options

The Menu Function controls the settings and functions of the meter. To
enter the Menu press the Mode Button to highlight the Menu option on
the LCD and press the Enter Button.

System Setup

Highlight the System Setup option and press the Enter Button to enter
this menu. Press the Up and Down Buttons to scroll through the System
Setup Menu. To adjust a value, press the Enter Button to select it and
press the Up and Down Buttons to adjust the value. Press the Enter
Button again to Save.
Measurement Units:
Receiving Gain:
Minimum Capture Measurement:
2-Point Calibration:
Auto Down:
Baud Rate:
Set Brightness:
534 Blue
123 Yellow
485 Red
123 Yellow
534 Blue
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
Only if you REALLY need them:
Metric and Imperial
LOW (resolution of 0.1mm) and HIGH (resolution
of 0.01mm). LOW is mainly used for measuring
coarse material with high scatter and small sound
absorption, such as cast aluminum, cast copper,
and other metallic parts.
OFF and ON
OFF and ON
Power-saving mode ON (default)
1200, 2400, 4800, 9600
Press the Enter Button to select, and use the Up
and Down Buttons to adjust
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
reedinstruments
www
Rich Black -
REED Instruments
20/20/20/100
17
com