Print Function; Memory Manager; Restore Factory Defaults - REED R7900 Manuel D'utilisation

Print Function

Highlight the Print Function option and press the Enter Button to enter this
menu. Press the Up and Down Buttons to scroll through the Print Function
Menu. To adjust a value press the Enter Button to select it and press the
Up and Down Buttons to adjust the value.
Print File and Print all Data:
Send Data to PC:

Memory Manager

Highlight the Memory Manager option and press the Enter Button to enter
this menu. Press the Up and Down Buttons to scroll through the Memory
Manager Menu. To adjust a value, press the Enter Button to select it and
press the Up and Down Buttons to adjust the value.
Erase File:
Erase All Data:
Erase CAL data:

Restore Factory Defaults

Highlight the About Software option and press the Enter Button to enter
this menu. Press the Zero Button to restore the factory default settings for
the meter. The meter will shutdown after this process.
534 Blue
123 Yellow
485 Red
123 Yellow
534 Blue
1-877-849-2127 | info@reedinstruments.com | www.reedinstruments.com
Only if you REALLY need them:
Connect the meter to a micro printer via the
RS-232 communication cable to print
measured results through the menu
selection. When the printing is completed,
the meter will beep and the display will
return to the Menu
Connect the meter to a PC by using a
communication cable to send measured
results directly to your PC
Clears selected files
Clears all saved files
Clears calibrating data
Blue - 100/80/30/5
Yellow - 0/27/100/0
Red - 10/100/100/5
Yellow - 0/27/100/0
Blue - 100/80/30/5
reedinstruments
www
Rich Black -
REED Instruments
20/20/20/100
18
com