Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Wearing parts for contruction devices mentioned in the operating manual
such as drilling and sawing machines
Wearing parts are the parts subject to operation-related (natural) wear during proper use of the
device. The wearing time cannot be uniformly defined, and differs according to the intensity
of use. The wearing parts must be adjusted, maintained and, if necessary, replaced for the
specific device in accordance with the manufacturer's operating manual. Operation-related
wear is not a reason for defect claims.
•
Feed and drive elements such as toothed racks, gearwheels, pinions, spindles,
spindle nuts, spindle bearings, cables, chains, sprockets, belts
•
Seals, cables, hoses, packings, connectors, couplings and switches for pneu-
matic, hydraulic, water, electrical and fuel systems
•
Guide elements such as guide strips, guide bushes, guide rails, rollers, bea
rings, sliding protection supports
•
Clamping elements for quick-separating systems
•
Flushing head seals
•
Slide and roller bearings that do not run in an oil bath
•
Shaft oil seals and sealing elements
•
Friction and safety clutches, braking devices
•
Carbon brushes, commutators/armatures
•
Easy-release rings
•
Control potentiometers and manual swiching elements
•
Securing elements such as plugs, anchors, screws and bolts
•
Fuses and lamps
•
Auxiliary and operating materials
•
Bowden cables
•
Discs
•
Diaphragms
•
Spark plugs, glow plugs
•
Parts of the reversing starter such as the starting rope, starting pawl, starting
roller and starting spring
•
Sealing brushes, rubber seals, splash protection cloths
•
Filters of all kinds
•
Drive rollers, deflection rollers and bandages
•
Cable anti-twist elements
•
Running and drive wheels
•
Water pumps
•
Cut-material transport rollers
•
Drilling, parting and cutting tools
•
Energy storage
Wearing parts of this machine are marked in the spare parts list page 35 with (Ð) and the
spare parts with (#).
19
Publicité
Table des Matières
