GÖLZ ST 85 Mode D'emploi page 14

2.4 Warning of special dangers
Electric energy
Switch off the machine immediately if trouble occurs in the electrical system!
When working with the machine, maintain a safe distance from overhead electric lines. If work is to be carried
out close to overhead lines, the working equipment must be kept well away from them. Caution, danger! Check
out the prescribed safety distances!
If your machine comes into contact with a live wire:
-do not leave the machine,
-warn others against approaching and touching the machine,
-have the live wire de-energized,
-do not leave the machine until the damaged line has been safely de-energized!
Work on the electrical system or equipment may only be carried out by a skilled electrician himself or by spe-
cially instructed personnel under the control and supervision of such electrician and in accordance with the
applicable electrical engineering rules!
The electrical equipment of machines is to be inspected and checked at regular intervals. Defects such as loose
connections or scorched cables must be rectified immediately!
Necessary work on live parts and elements must be carried out only in the presence of a second person who can
cut off the power supply in case of danger by actuating the emergency shut-off or main power switch. Secure
the working area with a red-and-white safety chain and a warning sign. Use insulated tools only!
Gas, dust, steam and smoke
Carry out welding, flame-cutting and grinding work on the machine only if this has been expressly authorized,
as there may be a risk of explosion and fire!
Before carrying out welding, flame-cutting and grinding operations, clean the machine and its surroundings
from dust and other inflammable substances and make sure that the premises are adequately ventilated (risk
of explosion)!
Noise
Always wear the prescribed ear protectors!
Oil, grease and other chemical substances
When handling oil, grease and other chemical substances, observe the product-related safety regulations!
Be careful when handling hot consumables (risk of burning or scalding)!
Transporting and towing
The machine must be towed, loaded and transported only in accordance with the operating instruction!
2.5 Safety instructions for masonry bench saws
While operating all safety devices like blade guard and splash guard must be mounted!
Before operating check all safety devices are mounted and the blade is well secured on the blade shaft!
Place the masonry bench saw on an even and portative place!
Regard all safety specifications!
Keep the work area clean. Cluttered areas and benches invite injuries!
Make sure the operator has a good stand!
Any work on and with the masonry bench saw must be executed by reliable personnel only. Statutory minimum
age of 18 years must be observed!
Always shut down the actuation and unplug the mains plug before loading, shifting or transporting!
Always well secure the blade on the blade shaft. Use only recommended blades. Notice the range of blade size
mentioned in the ratings. Prevent jamming of the material to be cut!
Make no changes on the machine (changing rpm and so on) without consulting the manufacturer (EC-confor-
mity will expire)!
Keep children away. Do not let visitors touch the tool or extension cord. All visitors should be kept away from
work area!
Store the masonry bench saw in a dry, high or locked place, out of the reach of children or unauthorized per-
sons!
Always unplug the mains plug when leaving the masonry bench saw!
Stay alert. Watch what you are doing. Use common sense. Do not operate when you are tired!
Remove adjusting tools. Check to see that the tools are removed from the masonry bench saw before opera-
ting!
The used power supply must comply with the regulations of power distribution on building sites (fuse protection
over FI-protected switch)!
Always well secure the masonry bench saw and make sure it wasn't damaged while transporting on a truck!
Always keep the masonry bench saw in clean condition. Periodically inspect switches, plugs and extension
cables. Let them replace if damaged!
14