Description Of The Numeric Buttons - Yamaha RX-V620 Mode D'emploi

i
VOLUME +/–
Increases or decreases the volume level.
o
MUTE
Mutes the sound. Press again to restore the audio output
to the previous volume level.
EFFECT
Switches the effect speakers (center and rear) on and off
in the following cases:
• When the selector dial is set to the DSP/TUN position.
• While the indicator is lit for about 3 seconds after
pressing DSP.
Description of the Numeric
Buttons
The numeric buttons function in various ways depending
on the position of the selector dial or the combination of
other instructions.
When selecting an input source
1
Press INPUT regardless of the position of
the selector dial.
The indicator lights up for about 3 seconds.
2
You can select an input source with the
numeric buttons and 6CH INPUT while the
indicator is lit.
A
1
2
B
1
Input selector
buttons
2
6CH INPUT
CONTROLS AND FUNCTIONS
When selecting a DSP program
and turning on or off the effect
speakers (center and rear)
A
DSP program
group buttons
EFFECT
Press DSP regardless of the position of the
selector dial.
The indicator lights up for about 3 seconds.
You can select a DSP program with the
numeric buttons and turn on or off the effect
speakers (center and rear) by pressing
EFFECT while the indicator is lit.
Set the selector dial to the DSP/TUN
position.
You can select a DSP program directly with
the numeric buttons and turn on or off the
effect speakers (center and rear) by pressing
EFFECT.
B
7