Sp Delay Time; Display Set - Yamaha RX-V620 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8 SP DELAY TIME

Use this feature to adjust the delay of the center channel
sound. This feature works when this unit decodes a Dolby
Digital or DTS signal. Ideally, the center speaker should
be the same distance from the listening position as the left
and right main speakers. However, in most home
situations, the center speaker is placed in line with the
main speakers. By delaying the sound from the center
speaker, the apparent distance from the center speaker to
the listening position can be adjusted to make it seem the
same as the distance between the left and right main
speakers to the listening position. Adjusting the delay
time for the center speaker is especially important for
giving depth to the dialog.
Control range (ms): 0 to 5
Initial setting: 0 ms
8 SP DELAY TIME
CENTER • • • • • • 0ms
–/+
: Adjust
/
: Exit
L
RL
y
• Increasing the delay by 1 ms simulates moving the speaker
about 30 cm (one foot) farther away from the actual position of
the center speaker.
Center speaker image
C
R
C
RR

9 DISPLAY SET

9 DISPLAY SET
BLUE BACK • • • AUTO
OSD SHIFT • • • • • • 0
DIMMER • • • • • • • • • • 0
BLUE BACK
Selecting AUTO for the on-screen display setting displays
a blue background when there's no video signal input.
Nothing is displayed on the screen including the on-
screen display.
Initial setting: AUTO
OSD SHIFT (OSD off-set position)
This setting is used to adjust the vertical position of the
OSD.
Control range: +5 (downward) to –5 (upward)
Initial setting: 0
Press i to lower the position of the OSD.
Press j to raise the position of the OSD.
DIMMER
You can adjust the brightness of the front panel display.
Control range: –4 to 0
Initial setting: 0
10 MEMORY GUARD
Use this feature to prevent accidental changes to DSP
program parameter values and other settings on this unit.
Choices: ON, OFF
Initial setting: OFF
10 MEMORY GUARD
OFF
–/+
: Select
/
: Exit
Select ON to protect the following features:
• DSP program parameters
• All SET MENU items
• Center, rear speakers and subwoofer levels
• The on-screen display (OSD) mode
Notes
• When "10 MEMORY GUARD" is set to ON, you cannot use
the test tone.
• When "10 MEMORY GUARD" is set to ON, you cannot select
any other SET MENU items.
SET MENU
ON
41

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

0102v620

Table des Matières