Safety Information - BGS technic 8157 Mode D'emploi

INDENDED USE
This tool set is designed to set up Bosch EP/VE Rotary, Nikki, Nippon Denso, CAV Rotodiesel
injection pumps (top entry port) and the PSA XUD range of engines.
TOOLS
No.
1 Piston Height Adaptor M14
2 Adaptor Assembly, long M8
3 Adaptor Assembly, short M8
4 Probe
5 Adaptor Assembly, short M10
6 Extension, lenght 99mm
7 Extension, length 40.8mm
8 DTi Mounting Bracket (CAV)
9 Thread Adaptor M8 – M10
Dial Test Indicator Ø 41 mm
10
Clamping: Ø 8 mm / Accuracy: 0.01 mm

SAFETY INFORMATION

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to the
vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Diesel Fuel Pump Timing Set
Description
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
to be used as OEM
(VAG T10170)
Volvo 999-5382
Opel KM-571-A / VW 3313 / VW VAS6079
www.bgstechnic.com
BGS 8157
© BGS technic KG, Copying and further use not allowed