Intended Use; Safety Information - BGS technic 9491 Mode D'emploi

BMW M40, M44, M50, M52, M54, M56
TOOLS
1 Crankshaft locking tool,
to use the same as OEM 112300
2 Camshaft alignment tool,
to use the same as OEM 113240
3 Camshaft alignment tool,
to use the same as OEM 113190
4 Camshaft alignment tool
5 Spanner for Vanos unit,
to use the same as OEM 115490
6 Double Vanos alignment tool,
to use the same as OEM 116150
7 Chains-tensioner,
to use the same as OEM 114220
8 Vanos alignment tool,
to use the same as OEM 116180
9 Compressed air connection,
to use the same as OEM 113450
10 Disconnect clamp/locking pin set,
to use as OEM 113290, 113291,
113292

INTENDED USE

This tool set includes the tools listed above for adjusting engine timing on BMW M40, M44, M50, M52,
M54, and M56 engines.
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATION

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set for
1
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
2
7
5
Art. 9491
6
8
10
10
3
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
4
9