Intended Use; Safety Information - BGS technic 9699 Mode D'emploi

Flywheel / Crankshaft Pulley Locking and Chain
Cover Separating Tool Set for Renault / Nissan
TOOLS
1 Crankshaft pulley holding tool,
to be used as OEM
MOT 2019 / MOT 1789
2 Flywheel locking tool,
to be used as OEM MOT 919-02
3 Flywheel locking tool,
to be used as OEM MOT 1431
4 Timing chain cover removal tool,
to be used as OEM MOT 1716

INTENDED USE

This tool set has been designed for locking the flywheel and front pulley on the Renault engines listed
below. The tool set also provides the primary tools required for replacing the timing chain on the
Renault twin cam 1.4, 1.6, 2.0, 2.5 & 3.5 litre petrol engines.
• Specifically relevant to chain driven twin cam H4JT (1.4L petrol), M5M (1.6L petrol), M4R (2.0L
petrol) 2TR (2.5L petrol) & V4Y (3.5L petrol).
• Also relevant to M9R (2.0L Diesel) & M9T (2.3L diesel) for flywheel locking.
Use with BGS 8421
More information regarding this item and a list of suitable engines and models can be found on our
website: www.bgstechnic.com

SAFETY INFORMATION

•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
1
3
4
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9699
2
4
1
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed