After-Sales Service; Automatic Programmes - CONSTRUCTA CN261150 Mode D'emploi

Error message
Three zeros flash in the display.
The appliance is not in operation. A
cooking time appears in the display.
The microwave does not work.
The food takes longer than usual to
heat up
The turntable is making a scratching
or grinding noise.
Microwave operation has been can-
celled for no apparent reason.

After-sales service

Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.
E number and FD number
When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate bearing these numbers can
be found in the oven. You can make a note of the number of
your appliance and the telephone number of the after-sales
service in the space below to save time should it be required.
E no.
After-sales service O
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
Please find the contact data of all countries in the enclosed
customer service list..
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
This appliance corresponds to the standards EN 55011 and
CISPR 11. It is a Group 2, Class B product.

Automatic programmes

You can use the automatic programmes to defrost food with
the greatest of ease and prepare dishes quickly and easily. You
select the programme and enter the weight of your food. The
automatic programme makes the optimum setting. You can
select from 7 programmes.
24
Possible cause
Power cut
The rotary selector was accidentally pressed.
The "start" button was not pressed after the set-
ting was made.
The door was not fully closed.
The "start" button was not pressed.
The microwave power setting was too low.
You have placed a larger amount of food than
normal in the appliance.
The food was colder than usual.
There is dirt or a foreign object in the area
around the turntable drive.
The microwave has a fault.
FD no.
Remedy/Note
Reset the time.
Press the "stop" button.
Press the "start" button or clear the setting
by pressing the "stop" button.
Check whether food remains or foreign
material is trapped in the door.
Press the "start" button.
Select a higher microwave power setting.
Double the amount = double the cooking
time.
Stir or turn the food during cooking
Clean the roller ring and recess in the
cooking compartment.
If this fault occurs repeatedly, please call
the after-sales service.
Group 2 means that microwaves are produced for the purpose
of heating food. Class B states that the appliance is suitable for
private households.
Technical data
Input voltage
Power consumption
Maximum output power
Microwave frequency
Fuse
Dimensions (HxWxD)
­ appliance
­ cooking compartment
Net weight
60 cm cabinet frame
VDE approved
CE mark
Environmentally-friendly disposal
Dispose of packaging in an environmentally-friendly manner.
This appliance complies with European Directive
2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE). The directive gives a framework for
the collection and recycling of old appliances, which is
valid across the EU.
Setting a programme
Once you have selected a programme, make settings as
follows:
AC 230 V, 50 Hz
1450 W
900 W
2450 MHz
10 A
280 mm x 513 mm x 405 mm
215 x 337 x 354 mm
19.153 kg
382 x 594 x 20 mm
yes
yes