Spray Function; Cleaning; Self-Cleaning - Singer SNG 4.23 Instructions D'utilisation Et Consignes De Sécurité

Please note: before cleaning the iron in any way, make sure
that the appliance plug is not connected to the socket.
Any deposits, starch residue or size left on the plate can be re-
moved using a damp cloth or an unabrasive liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped
over with a dry cloth.
The self-cleaning feature cleans inside the plate, removing impuri-
ties. We recommend using it every 10–15 days.
Directions:
26 GB/IE/NI
311270_Singer_Buegeleisen_SNG4.23_content_DE_GB_IE_NI_FR_HU_CZ_SK.indd 26

Spray Function

Make sure that there is water in the reservoir. Press the spray
button slowly (for a dense spray) or quickly (for a vaporized
spray) (Fig. 6).
for delicate fabrics, we recommend moistening
the fabric beforehand using the spray function, or putting a
damp cloth between the iron and the fabric. To avoid staining,
do not use the spray on silk or synthetic fabrics.

Cleaning

Self-cleaning

Fill the reservoir up to the maximum level indicated and set the
steam selector to " ".
Set the thermostat knob to the maximum temperature and wait
for the pilot light to turn off.
Pull the plug out of the socket and hold the iron horizontally
over the sink.
Hold the cleanout button setting until all the boiling water,
steam, impurities come out (Fig. 7).
When the soleplate has cooled down, you can clean it with a
damp cloth.
31.10.18 14:36