Figure 4-2: Connecting Your Network Devices; Figure 4-3: Connecting The Power - Cisco Systems LINKSYS WRT54G Guide De L'utilisateur

Wireless-G Broadband Router
5. Connect your network PCs or Ethernet devices to the Router's numbered ports using standard Ethernet
network cabling.

Figure 4-2: Connecting Your Network Devices

6. Connect the AC power adapter to the Router's Power port and the other end into an electrical outlet. Only use
the power adapter supplied with the Router. Use of a different adapter may result in product damage.
Now that the hardware installation is complete, proceed to "Chapter 5: Configuring the Wireless-G
Chapter 4: Connecting the Wireless-G Broadband Router
Hardware Installation for Connection to Your Broadband Modem

Figure 4-3: Connecting the Power

Broadband Router."
IMPORTANT: Make sure you use the power
adapter that is supplied with the Router. Use of a
different power adapter could damage the Router.
9