Basic Operation - CyberPower Professional Rack Mount LCD Serie Manuel D'utilisation

FRONT / REAR PANEL DESCRIPTION
1. Power Switch
Master on/off switch for equipment connected to the UPS.
2. Power On Indicator
Indicate that the AC utility input power's condition is normal and that the UPS outlets are providing power, free
of surges and spikes.
3. Multifunction LCD Readout
An LCD that shows various UPS information using icons and messages.
4. LCD Readout Toggle Button
Used to select among a variety of information the LCD can display.
5. Battery Backup, Surge Protected and AVR protected Outlets
This unit provides a total of ten outlets with battery backup and surge protection. They ensure that connected
equipment will keep an uninterrupted operation over a period of time, during a power failure.
Critical /Non-critical
It is possible to program the unit in a way so that the outle block marked as "non-Critical", (6 ports), will stop the
provision of power to connected equipment after a certain period of time, thus making more runtime available
for the equipment connected on the outlets marked as "Critical", (4 ports). In other words, the user can
establish runtime priority for certain connected equipment, maximizing its "availability" during a prolonged
power outage. This type of control takes place with the use of the provided PowerPanel
6. AC Inlet
Connect the AC Power cord to a properly wired and grounded outlet.
7. Output Circuit Breaker
The circuit breaker serves to provide output overload and fault protection.
8. Input Circuit Breaker
The circuit breaker serves to provide input overload and fault protection.
Copyright © 2016 CyberPower Systems, Inc.

BASIC OPERATION

7
5
15
PR3000ELCDRT2U
3
9 8
13 14
Expansion Port
Provides SNMP Card Communication
EPO
Serial Port I Serial Port II
IN
(PRIMARY)
16 11 12 10
®
Business Edition S/W.
2 1
4
6
AC INPUT
OUT
4