Télécharger Imprimer la page

Q&A; Supernova 650P2 Cable Configuration; Supernova 850P2 Cable Configuration - EVGA SUPERNOVA PLATINUM 650 P2 Mode D'emploi

Publicité

Les langues disponibles
  • FR

Les langues disponibles

650W / 750W / 850W PLATINUM Power Supply User Manual
Q&A
Q: I see there are
more than 4 screw holes
on the back of the power supply, but the packaging only offers (4)
screws,
are some
missing?
Nothing is
missing; you will only need to attach the EVGA power supply to the case with 4 screws. The power
A:
provide optimal compatibility
supply offers more than (4) holes to
Q: My EVGA Power Supply includes (2)
EPS cables
A: Motherboards
only require (1) 4+4 or 8Pin EPS
connection on the motherboard may be found for
motherboard support dual 4+4Pin EPS connections, please refer to your
details on the proper function and power if the EPS connections.
ECO Thermal Control
System?
Q. What is the
A. The
ECO Thermal Control
System, when enabled, allows the fan on your EVGA power supply to shut off
during low to moderate operation loads. The EVGA power supply's fan will
needed, based on the temperature the power supply reaches. The fan will also increase in RPM when needed,
based on the load operation being requested from the components connected. This prevents unnecessary
rotation,
reduces ambient noise
levels and will
not required.
Please Note: If the ECO Thermal Control is disabled the fan will always spin, even at low loads. The fan will also
increase in RPM as needed automatically, based on the power draw from attached components.
Q. What if I want to use
power adapters
for my video card(s)/motherboard/peripherals?
A. EVGA always recommends the use of
direct power connections
card(s), motherboard connections and other auxiliary power connections for optimal power distribution.
Q. Does it matter
which end of the cable
I plug into the power supply?
A: Yes, the connections going to the power supply, will not have "break downs" like the EPS (CPU) has 4+4 on one
side and full 8-Pin on the other. Another example is the 24-Pin cable, you can see on the PSU side it is a total of
28 Pins, where the 24-Pin connection will go to the motherboard directly.
appropriately to match the power supply side and connect only the same
supply as referenced on each connector.
Q. If I have an issue or a question, can I get support?
A. ALL EVGA products are backed by tom tier warranties as well as 24/7 technical support. Support can be
reached for your power supply at
888-881-3842
English
for today's varied case designs.
for my motherboard, do I need to connect up both?
connection, on some models, an additional 4+4Pin or 8Pin
dual CPU
configurations or for
extreme over
clocking. If your
motherboard manufactures manual
automatically turn back on
increase the life span
of the fan due to the fan not spinning when
from the power supply to power the video
Check each cable
as it is labeled
''matching"
cable directly to the power
option 1, option 3. or contact us via email at support@evga.com.
5

SuperNOVA 650P2 Cable Configuration

Modular Connector
MB
CPU1
VGA1
VGA2
SATA1
SATA2
SATA3
for
PERIF
FDD
when
SuperNOVA 750/850P2 Cable Configuration
Modular Connector
MB
CPU1
CPU2
VGA1
VGA2
VGA3
VGA4
SATA1
SATA2
SATA3
PERIF
FDD
650W / 750W / 850W PLATINUM Power Supply User Manual
Cables
Cable Color
1 x ATX 24-Pin
1 x EPS/ATX12V 8(4+4)-Pin x 2
2 x PCI-E 6-Pin + 8(6+2)-Pin
Black
3 x SATA 5-Pin x 3
2 x Molex 4-Pin x 3
1 x Molex to FDD Adapter
Cables
Cable Color
1 x ATX 24-Pin
2 x EPS/ATX12V 8(4+4)-Pin
2 x PCI-E 8(6+2)-Pin
2 x PCI-E 6-Pin + 8(6+2)-Pin
Black
2 x SATA 5-Pin x 3
1 x SATA 5-Pin x 4
1 x Molex 4-Pin x 4
1 x Molex to FDD Adapter
6
English

Publicité

Chapitres

loading

Ce manuel est également adapté pour:

Supernova platinum 750 p2Supernova platinum 850 p2