Introduction; Safety Information; Features; Installation - EVGA Bronze 500B Mode D'emploi

500W / 600W Bronze Power Supply User Manual
Introduction: Premium Power
Thank you for purchasing the EVGA 500B/600B 80PLUS
are premium quality power supplies intended to meet the needs of the most demanding PC enthusiast systems.
Designed with enthusiast needs in mind EVGA 500B/600B is the best choice to power next generation systems.
EVGA 500W BRONZE
EVGA 600W BRONZE

Safety Information

WARNING: This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will
void the products warranty. EVGA will not be responsible for any result of improper use, including but not limited to,
any use of the product outside of its intended purpose or use inconsistent with the warranty terms available online.
(Warranty information is available at www.evga.com/support/warranty
www.evga.com/manuals).
English
® BRONZE Rated power supply. EVGA 500B/600B
and this manual is available at
2
500W / 600W Bronze Power Supply User Manual

Features

STABLE POWER
The 500B/600B has outstanding electrical performance with ultra stable voltage and extremely clean power
output. This can help you achieve the highest possible overclock (optional) and provide the most stable and reliable
power to all components. The 500B/600B also provides up to 85% efficiency and is 80 PLUS BRONZE certified.
TOP QUALITY PROTECTIONS
The 500B/600B comes equipped with the most comprehensive protection set possible, including Over Voltage
Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP),
Over Temperature Protection (OTP), and Over Current Protection (OCP). This product is also covered by a
3-year warranty and EVGA's legendary customer service and support.

Installation

1. Remove the power supply from its packaging.
2. (Optional) Using the provided PSU testing tool, connect the 24pin cable to the
PSU, then attach the testing tool to the 24pin cable. Connect the ATX power cable
to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan
to use. Once connected, turn the power switch to the ON position.
Please note: If you are using a water cooling configuration, this testing tool
provides a simple, safe, option for bleeding/draining/testing water cooling
components without the need of a paperclip or other device.
3. Use the screws provided with your case to install the power supply into your
computer. NOTE: It is recommended to install the power supply with the fan
facing down. However, if your case places the power supply at the bottom of
the case and there are no ventilation holes available, it may be best to install
the power supply with the fan facing up for greater efficiency and reliability.
3
English