Introduction; Safety Information; Features; Installation - EVGA BRONZE 500 BQ Mode D'emploi

500W / 600W Bronze Power Supply User Manual
Introduction: Premium Power
Thank you for purchasing an EVGA BQ 80 PLUS
quality power supply that offers great value to gamers / system builders. The modular design provides custom
cable configurations for any application, and due to the ultra silent Fluid Dynamic Bearing 120mm fan, the
500BQ/600BQ series reduces heat during heavy load while keeping the decibel level down. Designed with stability
and durability in mind, the 500BQ/600BQ series is the perfect choice to power your systems.
EVGA 500W BRONZE
EVGA 600W BRONZE

Safety Information

WARNING 1: This unit has no user-serviceable parts inside. Opening the casing presents a risk of electrocution and will
void the product's warranty. EVGA will not be responsible for any result of improper use, including but not limited to,
any use of the product outside of its intended purpose or use inconsistent with the warranty terms available online.
(Warranty information is available at www.evga.com/support/warranty
www.evga.com/manuals).
WARNING 2: Only use included cables or cables purchased from EVGA.com that are specifically labeled for your PSU.
Using incorrect cables runs the risk of catastrophic failure.
English
® BRONZE series power supply. The 500BQ/600BQ is a high
and this manual is available at
2
500W / 600W Bronze Power Supply User Manual

Features

STABLE POWER
The 500BQ/600BQ has outstanding electrical performance with
power output. This can help you achieve the highest possible overclock (optional) and provide the most stable
and reliable power to all components. The 500BQ/600BQ also provides
(220VAC~240VAC) efficiency and is 80 PLUS ®
TOP QUALITY PROTECTIONS
The 500BQ/600BQ comes equipped with the most comprehensive protection set possible, including Over Voltage
Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protection (SCP),
and Over Current Protection (OCP). This product is also covered by a
customer service and support.
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures
any system. Modular PSU designs allow the user to disconnect the cable from the power supply side if they
are not needed for the specific configuration. This can help
management as well as airflow throughout the system.

Installation

1. Remove the power supply from its packaging.
2. Use the screws provided with your case to install the power supply into
NOTE:
your computer. It is recommended to install the power supply with
the fan facing down. However, if your case places the power supply at the
bottom of the case and there are no ventilation holes available, it may be
best to install the power supply with the fan facing up for greater efficiency
and reliability.
3. Connect the 20+4-Pin ATX cable to the motherboard.
ultra stable voltage and extremely clean
up to 85% (115VAC) / 88%
BRONZE certified.
3-year warranty
and EVGA's legendary
with better airflow overall and provide a clean look to
free up space inside the case and improve cable
3
English