Features; Installation - EVGA SUPERNOVA PLATINUM 650 P2 Mode D'emploi

650W / 750W / 850W PLATINUM Power Supply User Manual

Features

STABLE POWER
The SuperNOVA PLATINUM series has outstanding electrical performance with
clean power output.
This can help you achieve the highest possible overclock (optional) and provide
the most stable and reliable power to all components. The SuperNOVA PLATINUM series also has high efficiency
up to 92% (115VAC) / 94% (220VAC~240VAC) efficiency
ECO THERMAL CONTROL SYSTEM
The EVGA ECO Intelligent Thermal Control System
and longer life span of the fan. Enabled by a simple switch directly on the power supply, the
is ideal for users looking to reduce ambient noise overall. Save on
the EVGA ECO Thermal Control System.
TOP QUALITY PROTECTIONS
The PLATINUM series comes equipped with the most comprehensive protection set possible, including Over
Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit Protec-
tion (SCP), Over Current Protection (OCP). This product is also covered by an exceptional
EVGA's legendary customer service and support.
SUPERIOR BUILD QUALITY
The SuperNOVA PLATINUM series is built to the highest standards, using
degrees Celsius and high quality brand-name semiconductor components for the highest performance and reliabil-
ity. The Ultra Quiet 140mm double ball bearing
not needed and proper cooling during heavy load operation.
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures
any system. Fully Modular PSU designs allow the user to disconnect the cable from the power supply side if they
are not needed for the specific configuration. This can help
management as well as airflow throughout the system. EVGA offers fully modular designs on all P2 series and
include a cable storage bag in case you plan to upgrade or add more components for storage.

Installation

1. Remove the power supply from its packaging.
2. (Optional) Using the provided PSU testing tool, connect the 24-Pin cable to the
PSU, then attach the testing tool to the 24-Pin cable. Connect the ATX power cable
to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan
to use. Once connected, turn the power switch to the ON position. (If the ECO
mode is set to ON, the fan will not spin)
Please note: If you are using a water cooling configuration, this testing tool
provides a simple, safe, option for bleeding/draining/testing water cooling
components without the need of a paperclip or other device.
English
ultra stable voltage
80 PLUS PLATINUM
and is certified.
provides silent operation at low loads, improved efficiency
"No Fan Spin"
energy costs and unnecessary fan usage with
10-year warranty
100% Japanese capacitors
fan provides adequate cooling to allow near silent operation
with better airflow overall and provide a clean look to
free up space inside the case and improve cable
3
3. Use the screws provided with your case to install the power supply
into your computer.
supply with the fan facing down. However, if your case places the
power supply at the bottom of the case and there are no ventilation
holes available, it may be best to install the power supply with the
and extremely
fan facing up for greater efficiency and reliability.
4. Connect the 24-Pin ATX cable to the PSU and the motherboard.
feature
5. Connect the 4+4-Pin EPS12V cable to the motherboard.
(Optional)
– If you plan on
motherboard supports additional 8Pin or 4Pin CPU power
and
connectors, connect the second 4+4-Pin EPS12V cable. This is
only needed for heavy overclocking or for Dual CPU motherboards.
rated at 105
6. Connect the 6/6+2-Pin PCI-E cables to your graphic card(s).
when
NOTE: Do not attempt to plug an 8-Pin PCI-E cable into a 6-Pin
connector without first detaching the two extra pins.
7. Connect SATA power cables to all data drives or optical drives.
(hard drives, solid state drives, optical drives)
8. Connect the peripheral "Molex" 4-Pin connectors for fans, pumps,
legacy components and other devices/adapters.
9. Connect the AC power cord to your power supply and to the wall.
Check all connections to assure a solid connection and turn the
power switch on the power supply to the ON position.
650W / 750W / 850W PLATINUM Power Supply User Manual
NOTE: It is recommended to install the power
extreme overclocking
and your
4
English