Niko 16-72 Serie Mode D'emploi page 78

16-72X
Installation
Locate the IR-receiver of the hi-fi device and clean it if necessary. Remove the strip covering
the self-adhesive layer on the bottom of the IR-holder and fix it onto the IR-window of the AV
device. Then insert the IR-transmitter into its holder.
The mini-jack plug is plugged into the connection block (16-724) labelled 'EMITTERS'.
Attention: make sure that the dipswitches of the connection block (16-724) are in the 'EM
ON' position when the mini IR-transmitter is plugged into the corresponding connection. The
16-726 or 16-727 can be damaged if this jumper is set incorrectly.
78 EN