Niko 16-72 Serie Mode D'emploi page 70

16-72X
16-720 FLUSH MOUNTING MINI IR-RECEIVER
Specifications
This IR-receiver is ideally suitable for unobtrusive flush mount-
ing in a wooden wall, ceiling... Only the finished border will be
visible after installation.
- Tubular cover (12mm diameter) provided with screw thread for installation in hollow walls,
ceiling, furniture panels...
- Delivered with washer and nut for the installation.
- The 4-pole, 3.5mm connection jack can be plugged directly into the 16-724 connection block.
This connector holds the connections for the +12V, GND, IR-signal and status signal.
- Integrated circuit for the suppression of undesired ambient light.
- Integrated green LED for on/off indication (status signal).
- Integrated blue LED that lights when receiving IR-signals.
- Power supply: 12V/6mA supplied by IR-connection block 16-724
- IR-lens limiting the interference of visible light.
- Carrier frequency of IR-signal: 28 to 90kHz
- Reception range: up to 10m, depending on the ambient light
- Reception range: ± 50m
- Dimensions: H 29mm x W 80mm x D 27mm
- Cord length: 2,40m
- Delivered with white or black finished border that clicks onto the receiver lens. In locations
with a lot of sunlight or scattered light (e.g. from fluorescent lamps or plasma screens),
finished borders with smaller openings can be used. In this case, however, the reception
range will be reduced.
70 EN