Installation - Niko 16-72 Serie Mode D'emploi

16-72X

Installation

- Mount the AV equipment so that none of the individual components interfere with the IR-
reception of the others. Make sure the components are stacked straight and that any shelves
on which the equipment is placed stand as far back as possible, so that they do not block
the IR-emissions.
- Before permanently mounting the IR-radiator, it is recommended to try out a number of
different positions. If necessary, please install a second IR-radiator (see figure p.81).
- Once its optimal position has been selected, the 16-728 can be fixed to a level surface by
means of its self-adhesive layer. Where necessary, it can also be secured with an additional
screw.
- The 16-728 is plugged into the connection block (16-724) labelled 'Emitters/Blaster',
- The corresponding dipswitch of the connection block (16-724) into which the IR-radiator has
been plugged should be set to the 'BL-ON' position.
80 EN