Working Advice - Bosch GLL 2 Professional Notice Originale

OBJ_BUCH-2413-002.book Page 18 Tuesday, August 30, 2016 12:40 PM
18 | English

Working Advice

 Always use the centre of the laser line for marking. The width of the
laser line changes with the distance.
Attaching with the Holder
With the holder 10, you can fasten the measuring tool to different objects
ranging in thickness between 10 and 60 mm, such as vertical or horizon-
tal boards or pipes.
Loosen the fastening screw 9 of the holder, mount the holder to the de-
sired location and tighten the fastening screw again.
Place the measuring tool via the tripod mount 11 onto the 1/4" male
thread 7 of the holder and screw it on applying moderate force. Do not
overtighten the measuring tool, otherwise it can become damaged.
Adjust the holder roughly before switching on the measuring tool. For
this, loosen the locking screw 8 for the holder and move the measuring
tool until horizontally positioned at the desired height. Retighten the lock-
ing screw.
Working with the Tripod
A tripod 14 offers a stable, height-adjustable measuring support. Place
the measuring tool via the tripod mount 11 onto the 1/4" male thread of
the tripod and screw the locking screw of the tripod tight.
Laser Viewing Glasses
The laser viewing glasses filter out the ambient light. This makes the red
light of the laser appear brighter for the eyes.
 Do not use the laser viewing glasses as safety goggles. The laser
viewing glasses are used for improved visualisation of the laser beam,
but they do not protect against laser radiation.
 Do not use the laser viewing glasses as sun glasses or in traffic. The
laser viewing glasses do not afford complete UV protection and reduce
colour perception.
1 609 92A 21X | (30.8.16) Bosch Power Tools