Working Advice; Working With The Tripod (Accessory) - Bosch GPL100-30G Consignes D'utilisation/De Sécurité

u Always use the centre of the laser point for marking. The
size of the laser point changes with the distance.
A tripod offers a stable, height-adjustable support surface for
measuring. Place the measuring tool with the 1/4" tripod mount
(4) on the thread of the tripod (11) or a conventional camera
tripod. Tighten the measuring tool using the locking screw of
the tripod.
Roughly align the tripod before switching on the measuring tool.
Attaching using the magnetic rotating mount
You can secure the measuring tool to magnetisable materials
using the integrated magnetic rotating mount (3).
u Keep your fingers away from the rear side of the magnetic
rotating mount while attaching the rotating mount to sur-
faces. The strong pulling force of the magnets (7) may jam
your fingers.
Roughly align the magnetic rotating mount (3) before switching
on the measuring tool.
Rotate the measuring tool on the magnetic rotating mount (3)
to make the bottom laser point visible or to project heights with
GPL100-30G 50G 11-20.indd 24

Working Advice

Use with Attachments

Working with the Tripod (Accessory)

(see figures AB)
-24-
4/23/21 5:27 PM