HP LASERJET 2200 Serie Guide De Mise En Marche Rapide page 18

Windows 98
Windows
2000 and
Windows XP
Windows
Millennium
Windows To install the software on Windows NT 4.0, you must have administrator privileges
(on start and restart).
NT 4.0
3
14
a The "Add New Hardware Wizard" window should appear on the
computer display. Click Next>.
b Select "Search for the best driver for your device. (Recommended)"
and then click Next>.
c Click the boxes as needed so that there is a check mark next to "Specify a
location:" (and NO check marks next to "Floppy disk drives" and "CD-ROM
drive").
d Place the HP LaserJet 2200 CD in the CD-ROM drive.
e Under "Specify a location:", type D:\9xME_LPT (where D is the letter of
your CD-ROM drive). Click Next>.
a The "Found New Hardware Wizard" window should appear on the
computer display. Click Next>.
b Select "Search for a suitable driver for my device (recommended)" and then
click Next>.
c Under "Optional search locations:", click the locations as needed so that
there is a check mark next to "Specify a location:" (and NO check marks
next to "Floppy disk drives" and "CD-ROM drives"). Click Next>.
d Place the HP LaserJet 2200 CD in the CD-ROM drive.
e Under "Copy manufacturer's files from:", type D:\2000_XP (where D is the
letter of your CD-ROM drive) and then click OK.
f The Wizard should display a window indicating that it has found the driver;
click Next>.
a The "Add New Hardware Wizard" window should appear on the
computer display.
b Select "Specify the location of the driver (Advanced)" and then click Next>.
c Select "Search for the best driver for your device. (Recommended)" and
then click the boxes as needed so that there is a check mark next to
"Specify a location:" (and NO check mark next to "Removable Media").
d Place the HP LaserJet 2200 CD in the CD-ROM drive.
e Under "Specify a location:", type D:\9xME_LPT (where D is the letter of
your CD-ROM drive). Click Next>.
a Place the HP LaserJet 2200 CD in the CD-ROM drive.
b When the welcome screen appears, follow the directions on the screen.
If the welcome screen does not appear: click Start, click Run, type
D:\SETUP (where D is the letter of your CD-ROM drive), and then click OK.
c Click the button next to Install Printer.
Follow the instructions on the screen to install the software.
ENWW