Model Identification; Parts And Feature Identification - Kenmore 78079 Mode D'emploi

Model Identification

Every Kenmore Room Air Conditioner has an
identification plate showing model number, part number,
serial number, and power requirements of unit.
Identification plate is located behind air filter, attached to
the lower left hand side of base pan.

Parts and Feature Identification

Figures 1 and 2 show location of air conditioner parts
and features described in this manual.
Figure 1. Air Conditioner External Parts Identification
1. Outer case
2. Air discharge vent airflow direction control lever
3. Vent door control lever
4. Side air louvers
5. Curtain assembly
6. Air discharge vent
7. Front grille
8. Air return vent
9. Electronic control panel
9
2
8
7
1
3
5
6
Figure 2. Air Conditioner Internal Parts Identification
1. Fan motor
2. Slinger ring
3. Condenser coil and fins
4. Compressor
5. Vertical air discharge vent louvers
6. Identification plate
7. Evaporator coil and fins
8. Thermostat
9. Blower fan
10. Condenser fan
9
8
4
7
NOTE: In Figure 2, fan assembly (including blower fan,
condenser fan, fan motor, and slinger ring) is
shown removed for easier component
identification.
4
2
10
5
6
1
3
4