hestan KRT304-NG Mode D'emploi page 8

LOCATION AND INSTALLATION/VENTILATION
EN
RECOMMENDED
GAS SHUT-OFF
VALVE LOCATION
NOTES:
* SHADED AREAS INDICATE WHERE COMBUSTIBLE
MATERIALS ARE NOT ALLOWED.
* APPLIANCE TOP MUST BE LEVEL OR HIGHER THAN THE
ADJACENT COUNTERTOP SURFACES.
* "G" IS GAS CONNECTION ZONE ON REAR WALL. MOUNT
SHUT-OFF VALVE AS HIGH AS POSSIBLE IN THIS ZONE
FOR EASY ACCESS WHEN RANGETOP IS INSTALLED.
* "E" IS ELECTRICAL SUPPLY ZONE.
* "W" IS APPLIANCE OPENING.
* "V" IS MIN. CLEARANCE TO REQUIRED VENTILATION HOOD.
FRONT COOLING VENTS FRONT COOLING VENTS
NOTICE
When placing your rangetop in the cabinet, DO NOT
BLOCK or obstruct the front cooling vents shown.
These vents allow air into the appliance to keep the
internal electronic parts cool.
6
©2021 Hestan Commercial Corporation
INSTALLATION CLEARANCES WITH ISLAND TRIM
COMBUSTIBLE
MATERIALS
V
W
7-1/2" [19] MAX.
OPENING
HEIGHT
PLATFORM
10"
[25.4]
28-1/2"
[72.4]
G E
9-1/2"
ELECTRICAL
[24.1]
SUPPLY
2"
LOCATION
[5.1]
FRONT VIEW
COOKING
SURFACE
APPLIANCE
TOP
12"
[30.5]
MIN. CLEARANCE
TO NEAREST
COMBUSTIBLE
SIDE SURFACE
28-3/16"
[71.6]
37-1/8"
[94.3]
TO COOKING
SURFACE
FINISHED
FLOOR
DIMENSIONS IN BRACKETS [ ] ARE IN CM.
SIDE VIEW
RANGETOP
MODEL
KRT304
KRT365/KRTS365
KRT364GD
KRT485GD
KRT484GD
COOLING
VENTS
(CONTINUED)
COMBUSTIBLE
MATERIALS
6"
MIN. CLEARANCE
[15.2]
TO COMBUSTIBLE
SURFACES WITH
ISLAND TRIM
For Island Trim installations,
counter surface should
have a cantilever surface
meeting the rear of
the Island Trim
ISLAND
TRIM
24-1/2" [62] MAX.
7-1/2" [19]
PLATFORM
MAX.
OPENING
HEIGHT
28-1/2"
[72.4]
W V
(MIN)
30" [76.2] 30" [76.2]
36" [91.4] 30" [76.2]
36" [91.4] 30" [76.2]
48" [121.9] 30" [76.2]
48" [121.9] 30" [76.2]